- Hydrotalcite
- Highly transparent hydrotalcite
- Catalyst carrier hydrotalcite
- Flame retardant hydrotalcite
- Stabilizer hydrotalcite
- Agricultural film hydrotalcite
- Nucleating agent hydrotalcite
- Magnesium hydroxide
- Mineral-derived magnesium hydroxide D100
- Synthesized magnesium hydroxide D110
- Electronic grade magnesium hydroxide D120
- Chemical method magnesium hydroxide D5
- Chemical method magnesium hydroxide D6
- Flame retardant
- Rubber specific flame retardant D130
- Efficient flame retardant D320/D320MD
- Efficient flame retardant D320T
- Efficient flame retardant H5VA/D330
- Thermal insulation materials
- Automotive lining
- Automotive insulation materials
- New energy battery insulation film
- Industrial insulation materials
Hydrotalcite
Main features of the product
Magnesium aluminum synthesized hydrotalcite
·Small particle size (particle size distribution range)
·Magnesium aluminum molar ratio Mg/Al is 2.0-2.3
· D50 1.5-2.0 μm
Figure 1 SEM image of hydrotalcite with good dispersibility
Magnesium aluminum synthesized hydrotalcite
·Small particle size (particle size distribution range)
·Magnesium aluminum molar ratio Mg/Al is 2.0-2.3
· D50 1.5-2.0 μm
Figure 1 SEM image of hydrotalcite with good dispersibility
Other performance
·Loose density 0.18-0.2 g/cm3
·Performance improvement
·PVC non-toxic and environmentally friendly heat stabilizer
·Excellent thermal stability
·Loose density 0.18-0.2 g/cm3
·Performance improvement
·PVC non-toxic and environmentally friendly heat stabilizer
·Excellent thermal stability
PVC Static Data Sheet
Stabilizer formula:
PVC 100phr； DOTP 50phr； Calcium zinc stabilizer 0.5phr; 2.1 phr of hydrotalcite.
Stabilizer formula:
PVC 100phr； DOTP 50phr； Calcium zinc stabilizer 0.5phr; 2.1 phr of hydrotalcite.
Specification
Recommended usage method
Product addition ratio, or suggestions for using it together with other different additives
PVC 100phr； DOTP 50phr； Calcium zinc stabilizer 0.5phr; 2.1 phr of hydrotalcite.
Suggest adding 2.1 parts of hydrotalcite as a heat stabilizer to 100 parts of PVC.
Product addition ratio, or suggestions for using it together with other different additives
PVC 100phr； DOTP 50phr； Calcium zinc stabilizer 0.5phr; 2.1 phr of hydrotalcite.
Suggest adding 2.1 parts of hydrotalcite as a heat stabilizer to 100 parts of PVC.
Parameter comparison
Third party SGS testing
Test conclusion:
The EU RoHS Directive 2011/65/EU did not detect lead, mercury, cadmium, hexavalent chromium, polychlorinated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), dibutyl phthalate (DBP), butyl phthalate (BBP), di (2-ethylhexyl) phthalate (DEHP), and diisobutyl phthalate (DIBP).
Test conclusion:
The EU RoHS Directive 2011/65/EU did not detect lead, mercury, cadmium, hexavalent chromium, polychlorinated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), dibutyl phthalate (DBP), butyl phthalate (BBP), di (2-ethylhexyl) phthalate (DEHP), and diisobutyl phthalate (DIBP).
