- Hydrotalcite
- Highly transparent hydrotalcite
- Catalyst carrier hydrotalcite
- Flame retardant hydrotalcite
- Stabilizer hydrotalcite
- Agricultural film hydrotalcite
- Nucleating agent hydrotalcite
- Magnesium hydroxide
- Mineral-derived magnesium hydroxide D100
- Synthesized magnesium hydroxide D110
- Electronic grade magnesium hydroxide D120
- Chemical method magnesium hydroxide D5
- Chemical method magnesium hydroxide D6
- Flame retardant
- Rubber specific flame retardant D130
- Efficient flame retardant D320/D320MD
- Efficient flame retardant D320T
- Efficient flame retardant H5VA/D330
- Thermal insulation materials
- Automotive lining
- Automotive insulation materials
- New energy battery insulation film
- Industrial insulation materials
Anticorrosive coating
Description
A&H.EZ4101-30-3 epoxy diluent is a diluent prepared using synthetic grade solvents, used to dilute epoxy coatings and other epoxy products to the applied state during construction.
A&H.EZ4101-30-3 epoxy diluent is a diluent prepared using synthetic grade solvents, used to dilute epoxy coatings and other epoxy products to the applied state during construction.
Purpose
Used to dilute epoxy coatings and other epoxy products to the construction state during construction.
Used to dilute epoxy coatings and other epoxy products to the construction state during construction.
Physical parameters
|
Appearance |
Liquid |
|
|
Color |
Colorless |
|
|
Flash Point |
15°C |
|
|
Specific Gravity |
0.85 kg/L |
(Approx.) |
|
Appearance |
Liquid |
|
|
Color |
Colorless |
|
|
Flash Point |
15°C |
|
|
Specific Gravity |
0.85 kg/L |
(Approx.) |
pay attention to
This product is only suitable for professional use.
This product is only suitable for professional use.
Secure
Please pay attention to the safety precautions on the packaging label. In addition, safety regulations set by relevant national or local governments should also be followed. Avoid inhaling solvent vapors or paint mist, and do not touch the skin or eyes with this product. Strong ventilation must be provided for construction in narrow or poorly ventilated areas. Although the ventilation conditions are good, protective equipment should still be worn.
Please pay attention to the safety precautions on the packaging label. In addition, safety regulations set by relevant national or local governments should also be followed. Avoid inhaling solvent vapors or paint mist, and do not touch the skin or eyes with this product. Strong ventilation must be provided for construction in narrow or poorly ventilated areas. Although the ventilation conditions are good, protective equipment should still be worn.
Annotations
The data in this manual was obtained under standard conditions. In actual use, environmental conditions may vary slightly. If there are any changes to the above data, the latest manual of our company shall prevail without further notice.
The data in this manual was obtained under standard conditions. In actual use, environmental conditions may vary slightly. If there are any changes to the above data, the latest manual of our company shall prevail without further notice.
