- Hydrotalcite
- Highly transparent hydrotalcite
- Catalyst carrier hydrotalcite
- Flame retardant hydrotalcite
- Stabilizer hydrotalcite
- Agricultural film hydrotalcite
- Nucleating agent hydrotalcite
- Magnesium hydroxide
- Mineral-derived magnesium hydroxide D100
- Synthesized magnesium hydroxide D110
- Electronic grade magnesium hydroxide D120
- Chemical method magnesium hydroxide D5
- Chemical method magnesium hydroxide D6
- Flame retardant
- Rubber specific flame retardant D130
- Efficient flame retardant D320/D320MD
- Efficient flame retardant D320T
- Efficient flame retardant H5VA/D330
- Thermal insulation materials
- Automotive lining
- Automotive insulation materials
- New energy battery insulation film
- Industrial insulation materials
Magnesium hydroxide
Advantage
|
Efficient halogen-free flame retardancy |
 |
|
Good weather resistance |
|
|
Excellent dispersibility |
|
|
broad applications |
|
|
High purity whiteness |
D110 flame retardant magnesium hydroxide is an ultrafine magnesium hydroxide produced by A&H Technology through synthetic methods. The product has the characteristics of high purity, high whiteness, small particle size, and excellent flame retardant and smoke suppression functions. It is an excellent choice for manufacturing green halogen-free and environmentally friendly flame retardant materials.
Compared with aluminum hydroxide, magnesium hydroxide has the advantages of high heat absorption during decomposition, good thermal stability and low relative hardness. It can be widely used in the field of flame retardancy for engineering plastics, epoxy resins, rubber, wires and cables, and their accessories.
Silane modification can improve the compatibility between inorganic fillers and polymers, significantly enhancing the flame retardancy, tensile strength, water resistance, and low-temperature performance of composite materials.
|
Efficient halogen-free flame retardancy |
|
|
Good weather resistance |
|
|
Excellent dispersibility |
|
|
broad applications |
|
|
High purity whiteness |
D110 flame retardant magnesium hydroxide is an ultrafine magnesium hydroxide produced by A&H Technology through synthetic methods. The product has the characteristics of high purity, high whiteness, small particle size, and excellent flame retardant and smoke suppression functions. It is an excellent choice for manufacturing green halogen-free and environmentally friendly flame retardant materials.
Compared with aluminum hydroxide, magnesium hydroxide has the advantages of high heat absorption during decomposition, good thermal stability and low relative hardness. It can be widely used in the field of flame retardancy for engineering plastics, epoxy resins, rubber, wires and cables, and their accessories.
Silane modification can improve the compatibility between inorganic fillers and polymers, significantly enhancing the flame retardancy, tensile strength, water resistance, and low-temperature performance of composite materials.
Product characteristics
|
Parameter |
Specification |
|
Magnesium Hydroxide Purity, % |
≥ 99.0 |
|
Loss on Ignition (800°C), % |
≥ 30.0 |
|
Iron Content (Fe), % |
≤ 0.01 |
|
Chloride Content (Cl−), % |
≤ 0.3 |
|
Surface Moisture, % |
≤ 0.5 |
|
Particle Size Distribution (d50), μm |
1.5-2.5 |
|
325 Mesh Sieve Passing Rate, % |
≥ 99.75 |
|
Whiteness Index, % |
≥ 98.0 |
|
Bulk Density, g/cm³ |
0.4-0.6 |
|
Parameter |
Specification |
|
Magnesium Hydroxide Purity, % |
≥ 99.0 |
|
Loss on Ignition (800°C), % |
≥ 30.0 |
|
Iron Content (Fe), % |
≤ 0.01 |
|
Chloride Content (Cl−), % |
≤ 0.3 |
|
Surface Moisture, % |
≤ 0.5 |
|
Particle Size Distribution (d50), μm |
1.5-2.5 |
|
325 Mesh Sieve Passing Rate, % |
≥ 99.75 |
|
Whiteness Index, % |
≥ 98.0 |
|
Bulk Density, g/cm³ |
0.4-0.6 |
Application scope
Composite materials exhibit excellent properties such as flame retardancy, oil resistance, stress cracking resistance, high mechanical strength, good heat resistance, moisture resistance, and surface smoothness.
Application case: Formula: EVA 77phr; Magnesium hydroxide 132phr; Other additives 11p hr
|
Property |
D110 Magnesium Hydroxide |
Imported Magnesium Hydroxide |
|
Limiting Oxygen Index (LOI), % |
43.1 |
38.7 |
|
UL94 Rating |
V0 |
V0 |
|
Melt Flow Index, g/10min |
1.55 |
0.25 |
|
Equilibrium Torque, Nm |
33.0 |
50.4 |
|
Volume Resistivity, PΩ·mm |
0.89 |
2.41 |
|
Whiteness, % |
76.63 |
71.41 |
|
Brightness, L* |
90.16 |
89.78 |
Composite materials exhibit excellent properties such as flame retardancy, oil resistance, stress cracking resistance, high mechanical strength, good heat resistance, moisture resistance, and surface smoothness.
Application case: Formula: EVA 77phr; Magnesium hydroxide 132phr; Other additives 11p hr
|
Property |
D110 Magnesium Hydroxide |
Imported Magnesium Hydroxide |
|
Limiting Oxygen Index (LOI), % |
43.1 |
38.7 |
|
UL94 Rating |
V0 |
V0 |
|
Melt Flow Index, g/10min |
1.55 |
0.25 |
|
Equilibrium Torque, Nm |
33.0 |
50.4 |
|
Volume Resistivity, PΩ·mm |
0.89 |
2.41 |
|
Whiteness, % |
76.63 |
71.41 |
|
Brightness, L* |
90.16 |
89.78 |
